← Back to blog

You connected several apps to automate a process. What happens when they stop talking to each other?

Nobody sets out to build a complicated system. It starts simple: you have a problem, you find a tool that solves it, you connect it to the app you already use. It works. A month later a new need comes up, so you add another app. Then another, to cover a case the first two didn't. No step seems wrong, because each one solves something specific.

A year later, though, you find yourself with five or six apps wired together, each passing data to the next, all held together with patience and a few rules only you still remember. As long as everything works, it looks like a success. The problem is that anything built from many connected pieces has a hidden weakness: a single link only has to stop working, and the whole process stops.

This article explains why that happens, what it looks like when the flow stops and, above all, who ends up fixing it. Connecting apps wasn't a mistake. The goal is to help you spot the signs early that you've reached the limits of this approach.

Why an automation built from several apps is fragile

First, to be fair: the apps you use for this, whether Zapier, Make, n8n or others, are good tools. Each one does the job it was designed for, and for simple flows they're exactly what you need. None of them is the problem on its own. Trouble starts when you chain several of them together and an important process depends on that chain.

The logic is simple. The more connected apps a process runs through, the more places it can get stuck. If your process depends on five apps passing data to one another, it only takes one of them behaving differently from what the next app in the chain expects, and the whole flow stops. The app itself still works; it just no longer communicates properly with the next one.

This isn't a rare or exotic problem. A study published by Zapier, one of the best-known platforms of this kind, found that three out of four companies have already had at least one negative outcome caused by disconnected tools, and more than a quarter already use over ten different apps. In other words, apps that stop talking to each other properly are a common pattern, and more and more companies run into it as they pile up tools.

How the connection between apps actually breaks

The process stops without any warning. No alarm goes off, no red light comes on. At some point, the data simply stops getting where it should. Here are the most common ways it happens.

An app changes how it works

The apps you connect are constantly updated by the people who make them, completely independently of you. One day, one of them changes the way it sends or receives data, renames a field or changes a format. When an app changes its behavior, you don't get any warning. The breakage happens, but you only find out later, when the data no longer arrives where it should.

A common example: many companies automatically pull ad spend data from Meta Ads into their reports, relying on a specific field that holds the amount. All it takes is for the platform to rename that field in an update, and the sync keeps running without throwing any error, except it no longer brings in the amount. Everything looks fine until someone notices, a few days later, that the numbers in the report are blank.

The process seems to be running, but data is missing

This is the most expensive one, because nothing flags the problem. The process seems to be running. The apps are on, nothing looks stopped. But somewhere in the chain, the data no longer flows correctly: some of it gets lost, some arrives wrong, and you only find out when a customer complains or a report comes out wrong.

A typical case: a flow pulls orders from an online store platform. The platform adds a new required field to its response, the flow doesn't know how to handle it, and from then on it skips the orders it can no longer read. At the end of the day, the report shows fifteen percent fewer orders. Depending on how the flow is built, nothing may have flagged the problem. The more the process deals with money, invoices or customers, the more a failure like this costs when nobody notices it.

Volume grows and the flow can't keep up

An automation built when you had ten orders a day can behave differently once you reach a hundred. Connected apps often have limits on how much they can process in a given time. What worked perfectly at low volume starts to miss, lag or skip tasks as the company grows, right when you most need things to work.

Small details that stop everything

Sometimes it's something that seems trivial. A date written in a different format from the one the next app in the flow expects. A usage limit being hit. Or an authorization linking two apps that expires after a few months, as it was designed to. Nobody renews it, because nobody knew they had to, and the next day data stops moving from one app to the other. Each of these small things can stop an entire flow, and tracking down the cause takes time and patience, because you have to search across several apps to find the link that failed.

Who fixes it when the flow stops

Anything technical can break; that's understandable. The real question here is: what happens next? The underlying weakness of an automation built from several chained apps is that there's nobody whose job it is to keep it running.

The promise you start with is that you set up the automation once and then move on to other things. The reality, once the chain gets long, is that you end up fixing it again and again. And the fixing usually falls to you, or to an employee who isn't a specialist and does it in between other tasks, trying to guess where the flow got stuck. Every time you have to step in, you lose time, the very time the automation was supposed to save you.

Even the platforms that offer these tools acknowledge the problem. The same Zapier research shows that companies often end up with employees wasting time moving data by hand between systems that no longer communicate, which means the automation ends up adding work instead of reducing it. You slide into this without noticing: you built something to make your work more efficient, and now the effort has moved into maintaining it.

When a few connected apps are enough, and when they aren't

None of this means you should never use tools like these. That would be bad advice. For a simple flow, with two or three apps and low volume, a connection built in Zapier, n8n or Make is a perfect fit: cheap and fast. The fragility there is small, because there are few links, and if an integration fails, you quickly find out which one.

The line gets crossed when the process becomes important to the company. When invoices, customers or money depend on it. When it handles high volume. When it has grown to run through many apps, each one added to cover a new case. At that point, the fragility that was acceptable in a small flow becomes a serious risk, and the time spent keeping it running starts to outweigh what you gain.

The signs that you've reached that point are easy to recognize. You spend more and more time hunting for the connection that failed. You've already found lost data that you didn't catch in time. The process has stopped at some point without anyone noticing right away. And most importantly, if you or the person who built the automation were away for a while, nobody else would know how it works.

The difference between a chain of apps and a system built for the process

The alternative to several apps wired together is a different approach. Instead of several separate tools passing data along that you have to watch over yourself, you build a single system, designed for your process from the start, as one whole.

In practice, the difference is big. A system built for a process checks whether each step actually ran and whether the data arrived correctly, and when something doesn't match, it sends an alert. A chain of separate tools doesn't do that: it keeps running and reports that everything is fine, even if it skipped half the data. Add one more essential point: a system is maintained by someone whose job that actually is, not by you, in between other tasks.

This is where you see the difference between running several connected apps on your own and working with a company that builds your solution, including in code, around your company's actual process. At Cicada Technologies you don't get a tool you have to manage yourself. You get a service with people behind it: a business analyst who maps your process at the start and a dedicated account manager you call directly, not a ticketing system that gets back to you in a few days.

Through our own platform, you can see at any time how your solution is working. In practice, the part your company depends on no longer rests on the shoulders of one person on your team. It's handled by a company whose job that actually is.

Frequently asked questions

Why do automations built in Zapier or Make break?

Usually the tool itself keeps working. What breaks is the communication between the connected apps. An app in the chain changes how it works, an authorization expires or the volume grows past what the flow can handle, and the process stops. The more apps are linked together, the more places this can happen.

How many connected apps are too many?

There's no fixed number; it depends on how important the process is. For a simple, low-volume flow, two or three apps are fine. The problem starts when invoices, customers or money depend on an entire chain, and the fragility becomes a risk you can no longer afford.

Is Zapier enough for my company?

For simple, occasional automations, yes, it's a good tool and a good fit. It stops being enough when the process is critical to the company, handles high volume and runs through many apps, because then the fragility of the chain and the maintenance time start to outweigh the benefit.

How do I know when an app has stopped talking to the others?

Most of the time, you don't find out right away, because the process gives no sign that anything is wrong. The signs show up indirectly: missing data, a customer complaint, a wrong report. That's why problems in a chain of apps are often discovered late, after they've already done damage.

What happens when an app in the chain goes down?

If the process depends on it, the whole flow stops from that point on. Data no longer moves forward, and the next steps don't run. Depending on the process, that can mean invoices not sent, orders not processed or information lost, until someone notices and fixes the link.

Key takeaways

An automation built from several connected apps comes from a good instinct and often works for quite a while. But as you add links, the setup gets more and more fragile, because every extra app is one more place where communication can break, most of the time without any warning.

Sooner or later, an app in the chain is likely to fail. Do you want to be the one who steps in every time that happens? As long as the process is simple and low-volume, a few connected apps are a good solution. Once it has become important to the company and hard to keep running, you need a system built for your process, maintained by someone else, not you.